Sigma Designs Port Devices Driver

Product Information

Software & Hardware Products

This project is an attempt to provide the Linux community with kernel drivers for two hugely popular DVD playback cards namely DXR3 from Creative Labs and Hollywood Plus from Sigma Designs. Bus 001 Device 004: ID 0658:0200 Sigma Designs, Inc. Aeotec Z-Stick Gen5 (ZW090) - UZB Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub.

Device Database®

Device List
Searching the Device Database

Downloads

Compliance Testing

Distributors

The Sigma Designs ZM3102 is an Integrated 8051 CPU and RF transceiver 64KB Flash ROM, 256 Bytes DATA Memory, 2KB XDATA, 1000 DIM step Triac controller 4-channels 12-bit rail-to-rail ADC 10 Integrated GPIOs, 1 x SPI port, 1 x UART port, 2 x 16-bit Timer (one with PWM mode) Watchdog timer Uses the unlicensed Short-Range Device(SRD) frequency bands 4-channel LED controller Sleep mode power consumtion 2,5Î¼A RF data rate 40 kbps Uses frequency bands 779...956 MHz for complete global coverage Power-On-Reset / Brown-Out Detection Battery monitor and built-in supply regulators Power supply: 2.3-3.6V.

[Chip Vendor]

[Distributors]

Brochure
708,908 bytes

Simulated Features

NOTE
Simulation for this device is provided by the default peripheral simulation driver.
Complete peripheral simulation is not available and is not planned to be implemented by ARM.

The following AGDI Drivers are available for the Keil Software µVision Debugger.

Keil ISD51 Driver
Keil

Products

Development Tools

Hardware & Collateral

Downloads

Support

Contact

Hello
I have an Aeotec by Aeon Labs USB stick G5, which I'm trying to connect to my QNAP TS-253 Pro with 4.3.3.0299 firmware.

This stick is properly discovered when connected to my PC under windows 10 and can be used to control z-wave devices (Tested with OpenHab2 on Windows 10). Since the stick works under windows, I suspect there is some compatibility issue with the current firmware of QNAP.

Sigma Designs Port Devices Driver Download

I've tried to follow steps from this forum and official aeotec docs:
https://aeotec.freshdesk.com/support/so ... essentials

Sigma Designs Port Devices Driver Downloads

When I connect the stick to one of the USB ports, I should be able to see it by using the lsusb command: 'Bus 001 Device 005: ID 0658:0200 Sigma Designs, Inc.”. However I don't see this entry. The output from lsusb remains the same with or without the stick connected. When I perform command 'ls /dev/tty*”, I should see the device “ttyACM0” listed, but it's not there. 'dmesg' output does not change either.
cdc-acm.ko is apparently included in 4.3.3 firmware, when I perform command: 'insmod /usr/local/modules/cdc-acm.ko” I get an error 'file exists'. I've tried to first rmmod this module and insmod it again, but this didn't solve the issue. I've also tried restarting my NAS, it didn't help either.

Sigma Designs Port Devices Drivers

Sigma Designs Port Devices Driver

When the stick is connected to the usb port, it flashes Blue, Yellow and Red (apparently this is normal operation). When I connect other devices like mouse, they work properly (and are visible in lsusb output).
How do I make the stick visible under lsusb?

Sigma Designs Port Devices Driver Update

@peelos: What firmware version are you currently using and does it work correctly?

Shc Srl Driver Download

Drivers Option Network & Wireless Cards